Payment & Shipping Terms:
|Product Name:||Rotary Vane Pump||Mode:||50M|
Rotary Vane Pump,
Double Vane Pump
25M/35M/45M/50M standard bearing of high profomance vane motor
Vickers high performance vane motors, when properly installed in a hydraulic circuit, convert hydraulic power into rotary mechanical power. They are positive-displacement, balanced cartridge units, with drive speed dependent on the motor size and gpm delivery to the inlet port. The units are capable of operating at high speeds and high pressures, or higher speeds at lower pressures, the full range model 50M, 51M, 45M, 46M, 35M, 36M, 25M, 26M Hydraulic Eaton Vickers Vane Motor
(lb in/ 100 psi
|50M||24,9 (220)||231,2 (14.11)||277,5 (73.3)||2800||34||73|
|28,8 (255)||268,1 (16.36)||321,8 (85.0)||3200||34|
|33,9 (300)||317,1 (19.35)||380,4 (100.5)||2200||155|
The unit consists principally of a body, cover, drive cartridge and shaft. Rotary motion is developed in the cartridge, which principally consists of a ring, rotor, ten vanes and two pressure plates. The rotor is splined and mates with the output shaft, which is supported by a ball bearing in the body and a bushing bearing in the cover pressure plate.
Optimum running clearances and hydraulic balance assure sustained high efficiency over the life of the motor.
The motor’s cover can be assembled in four positions with respect to the body. Changing port positions is accomplished by simply rotating the cover, and the cartridge which is pinned to the cover, in 90_ increments, thus providing the optimum mounting for connecting piping.
Easy to Service
The drive cartridge is accessible by removing the motor’s cover and can normally be replaced in ten minutes without removing the motor from the machine. The torque capability of motors within the same model series can be changed by changing the
cartridge or cam ring.
25M - 50M motors are hydraulically balanced to reduce wear and heat-producing friction. All internal inlet chambers are equally and diametrically opposed. As a result, pressure induced radial loads are balanced. Shaft bearings only have to carry external
loads so wear is greatly reduced.
For more than two decades, the reliability of these high performance motors has been field proven on a variety of machinery applications.
Contact Person: Ms. zhu