Payment & Shipping Terms:
|Product Name:||Eaton Vickers Vane Motor||Mode:||M2U|
|Oil Ports:||Side Ports||Displacement:||25-36CC|
|Flange:||Rhomb -flange||Material:||Cast Iron|
|Color:||Blue, Grey Or Black||Net Weight:||9.5KGS|
Single Vane Pump,
Double Vane Pump
M2U Series high Efficiency vane motor for Industrial Equipment
These motors offer a combination of low cost, pressures to 138 bar (2000psi), speeds to 2800 r/min, torques of 2.0, 2.8 or 4.0 Nm/6.9 bar (18, 25 or 35 lb. in./100 psi), flange or foot mounting,and choice of port locations.
M2U motors operate in one direction only, and rotation must be specified when ordering. Shaft rotation of
M2-200 motors can be reversed simply by reversing the direction of flow through the motor ports.
|Model||Torque Approx||Displacement||Maximum speeds & pressures||Approx|
|Model Nm/6,9 bar||cm3/r (in3/r)||weight|
|(lb in/100 psi)||kg (lb)|
|M2U||2,0 (18)||21,6 (1.32)||2800 r/min @ 138 bar (2000 psi)||7,7 (17)|
|2,8 (25)||25,4 (1.55)||2500 r/min @ 138 bar (2000 psi)|
|4,0 (35)||37,5 (2.29)||2000 r/min @ 138 bar (2000 psi)|
|M2–200||2,8 (25)||24,7 (1.51)||2200 r/min @ 138 bar (2000 psi)||9,5 (21)|
|4,0 (35)||35,4 (2.16)||1800 r/min @ 121 bar (1750 psi)|
Mounting Data :
Two internal inlet chambers are diametrically opposed as are two outlet chambers. This construction eliminates bearing loads resulting from pressure, a major cause of wear in designs without this feature.
The motor’s cover can be assembled in different positions with respect to the body. To change the relative location of the ports, it is necessary only to remove four cover bolts and rotate the cover to the desired position.This allows optimum positioning to suit connecting piping.
Optimum running clearances and hydraulic balance assure sustained high efficiency over the life of the motor.
Inertia of rotating parts is low ... parts are symmetrical, providing dynamic
balance and freedom from vibration.
Contact Person: Ms. zhu